...............................
..........:README:....EN.......
...............................
0.Disconnect the network cable! (work offline);
1.Use the Keygen.exe to generate your PTC HOST_ID license file;
2.Install the PTC License Server with your PTC HOST_ID license file which you got from Step 1;
3.Install Pro/ENGINEER, and select Single Server license type as the Pro/ENGINEER license;
then fill "your computer name" as the HOSTNAME in the BLANK before the port "7788".
***************************************************************************************************************************************************
*If you click the Setup Option" VERICUT (R) for Pro/ENGINEER" when you install Pro/ENGINEER and wanna the VERICUT as the *
*embedded software for pro/e, you should also do the following two steps for the embedded VERICUT: *
* A. Copy the patched CGtech.dll into the installed directory "C:\Program Files\proeWildfire 3.0\i486_nt\obj" to replace the original one. *
* B. Find the following file in the installed directory "C:\Program Files\proeWildfire 3.0\bin\proev.bat" and open it with an Editor software, *
* search *
* Vericut %argstr% *
* and replace it with the following string: *
* Vericut %argstr% PTC_KEY=0 *
* then save the file. the purpose of the step B. is to forbid the VERICUT to use the PTC lic as its lic.Actually, CGtech *
* no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official *
* website said: *
*
http://www.cgtech.com/ptc_update/index.htm *
***************************************************************************************************************************************************
4.Install Pro/Mechanica(Structural and Thermal Simulation) like Step 3.
5.Install PTC Distributed Services.this step will automatically get the lic from the lic server installed at step 2.
6.For M030 Version, You also need to:
replace the file "C:\Program Files\proeWildfire 3.0\i486_nt\obj\xtop.exe" - - - with the file "crack\xtop.exe"
replace the file "C:\Program Files\ptc_distributed_services\i486_nt\obj\dsq.exe" - with the file "crack\dsq.exe"
replace the file "C:\Program Files\mechWildfire 3.0\i486_nt\bin\mech.exe" - - - with the file "crack\mech.exe"
7.That is all and enjoy it! <07.02.2007>
===================================================================================================================================================
...................................
.............:A LIRE:......FR......
...................................
0.Debrancher le cable reseau (sans connexion internet);
1.avec le "Keygen.exe" (entrez y l'identifian 'ID') cree le ficher de licence;
2.Installer le "PTC License Server" en selectionant le fichier de licence cree en etape 1;
3.Installer le "Pro/ENGINEER" (normalement il selection automatiquement le "license unique personel";
ensuite vous dever avoir qqe chause comme: "votre_host_name@7788"
**************************************************************************************************************************************
* si vous selectionner (dans les options d'installation) d'installer l'option "VERICUT" vous dever aussi faire les les etapes A et B *
* *
* A: remplacer le fichier "C:\Program Files\proeWildfire 3.0\i486_nt\obj\CGtech.dll" par le fichier "\crack\CGtech.dll" *
* B: clic droit sur le fichier "C:\Program Files\proeWildfire 3.0\bin\proev.bat" et choisisser "EDIT" pour le modifier et: *
* *
* trouver la ligne avec (c'est vers la fin): *
* Vericut %argstr% *
* remplacer la par: *
* Vericut %argstr% PTC_KEY=0 *
* *
* sauvegarder et fermer le fichier; *
**************************************************************************************************************************************
4.Installer "Pro/Mechanica(Structural and Thermal Simulation)";
5.Installer "PTC Distributed Services";
6.Remplacer les fichiers suivantes:
"C:\Program Files\proeWildfire 3.0\i486_nt\obj\xtop.exe" avec "crack\xtop.exe"
"C:\Program Files\ptc_distributed_services\i486_nt\obj\dsq.exe" avec "crack\dsq.exe"
"C:\Program Files\mechWildfire 3.0\i486_nt\bin\mech.exe" avec "crack\mech.exe"
7.C'est tout! Bon travail (et desole pour l'ortographe) <07.02.2007>
==================================================================================================================================================
